Snowboard Binding
syndication.com/pagead/show_ads.js">
I’ve been snowboarding for 12 years now and in that time, I’m sad to say, I never learned how to set or adjust my own bindings or stance angle. I always left this up to my partner or the guys in the shop, and I just took their word for it. Last year, days before heading to Chamonix, my husband decided it was high time for me to take care of my own gear, so he handed me the screw driver and told me to figure it out for myself.
Through a lot of frustration and research I discovered that there is no one answer for what your stance should be. Stance is all based on what feels best for the rider and takes into consideration how aggressive a rider you are, whether you are goofy or regular, if you ride switch, and so much more. The best way to find a stance that feels right to you is to get on the bunny slope and try out a few variations.
Before you do that though, you’ll need to know how to adjust your bindings. To do this on the slope you’re going to need a Snowboard Tool. A Snowboard Tool is basically a compact screwdriver which has a ratchet mechanism that easily allows you to switch directions, i.e., screw in or unscrew. These tools can vary from simple to complex but all usually contain clever hiding places for additional bits. Whether you are a gear-head or not, this tool is a must have for all riders.
Next, looking at your bindings, you’ll see there are markings of degrees on the base plate. Also, there are screws on the base plate, usually three or four, which keeps the binding on the board. Using your tool, you should be able to partially unscrew these screws just enough so that you can manoeuvre the angle of the binding without actually having to take all the screws out. This technique helps avoid you dropping a screw in the snow while adjusting your stance angle on the hill.
With all the screws loose but still attached to the board, you should now be able to adjust your stance by gently twisting the binding right or left. Now for the frustrating part: which degree do you set each foot? This is where it comes down to preference. Some riders like a duck stance, meaning the toes on each foot are pointing outward. Some people like their back foot perpendicular and only a forward angle on the front foot. Then again, some people like both feet forward. If you’re a beginner, start with a basic stance of your front foot angled forward and your back either straight, or slightly forward.
Once you have your preferred angles set, use your tool and screw in all the screws. You can now strap into your bindings and see how things feel, being careful not to damage your board or edges depending on what type of flooring you are on. If you are happy with the settings, then you are now ready for the hill.
When you get on the hill, take a run with your new stance. If you feel like you are having difficulty turning, if the board feels squirrelly under you, or if things just don’t feel right in general, then find a safe spot on the side of the slope, or make your way to the bottom and find a space where you can get down and adjust your bindings. It’s all about figuring out what feels right for you, so get out your handy tool and get yourself sorted. It will likely take a few adjustments, but you’ll get there in the end and you’ll have done it all on your own. Go you!
If you need some new snowboarding gear or some extra cash for a trip to the slopes, then maybe Wonga.com can help you out with a short term loan online. Visit www.wonga.com/homepage.aspx” target=”_blank” title=”Cash advance online”>Wonga.com to learn more.
About the Author:
Jamey Wheeler writes for Wonga.com who offers short term loans online.
Article Source: ArticlesBase.com – Adjusting Your Snowboard Bindings: 101
Snowboarding Gear : How to Attach Snowboard Bindings
|
|
Coming Down the Mountain – TB3 This video is the ultimate combination of freestyle and extreme snowboarding… Witness Dave Hatchett’s first descent at Mendenhall Towers in Alaska, and sick freestyle moves by Peter Line and Jim Rippey. *** On location in: Hemsedal, Norway * Lech, Austria * Cortina, Italy * Whistler, BC * Switzerland * Alaska * Lake Tahoe * Oregon * Washington * Colorado * Utah *** Featuring Music by: Megadeth,… |
|
|
Dragon Got It Bad Mens Flexfit Hat Cap Snowboard Dragon is a leading maker of snowboards and snowboard clothing accessories. This hat features the distinctive logo and will be stylish addition to your hat collection…. |
|
|
Burton Scribe Est Womens Snowboard Bindings You’re not about to let anything get between you and your daily dose of shredding. But 24 hours a day inside your bindings can make even the best go mad. Lightweight with a soft, playful flex, the ShopGirl-inspired Scribe EST screams comfort with its ShredBED cushioning and anatomically correct hi-back. With asym shaped straps, switch it up by choosing between lateral power for pressing or medial… |
|
|
Lamar MX25 Men’s Snowboard Bindings (Size 5-9) $60.99 Instantly improve your snowboarding experience with Lamar MX25 snowboard bindingsBindings are designed to offer you all-mountain performanceSnowboard bindings have an aluminum adjustable heelcup |
|
|
Lamar Men’s Black MX30 Snowboard Bindings $75.99 Ride confidently in these MX30 Series snowboard bindings from Lamar. These bindings feature molded foam ankle straps, quick adjust ladders and heel ramp pads to keep you comfortable and riding the mountain all day. |
|
|
Technine T9 Men’s Snowboard Bindings (Size 6-9) $92.99 Get ready for the snow with a pair of T9 snowboard bindingsSnowboarding equipment offers all-mountain premium performanceSnowboard bindings feature 6061-T6 aluminum adjustable heel cups for comfort and control |
